Blank PolyLeather Card Case, 3" x 4.56", for sublimation. Card Case is black with a white imprintable panel and two slots to hold ID and one debit/credit card or cash, with keychain ring.
THIS ITEM COMES BLANK
Dimensions:
3" x 4.56"
PolyLeather Cases & Bags
50 seconds
375°F (191°C)
Light Pressure
Stacking Order From Top to Bottom
HEAT PLATEN
PROTECTIVE PAPER
TRANSFER
SUBSTRATE
PROTECTIVE PAPER
BOTTOM TABLE
OUR INSTRUCTIONS ARE BASED ON USING A PROFESSIONAL HEAT PRESS. TIMES AND TEMPERATURES VARY FROM ONE PRESS TO ANOTHER.
Detailed Instructions
Temperature
375°F (191°C)
Prepress
10
Time (min:sec)
:50
Pressure
Light
Heat Press Instructions
Hover transfer under open heat press for 10 seconds to dry excess moisture.
1. Cover the bottom table of the press with a sheet of protective paper. 2. Place blank product on bottom platen, cover with another sheet of protective paper and prepress for 10 seconds 3. Secure transfer to substrate using ProSpray, do not use tape. 4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. 5. Hang case off edge of heat press to protect back half of case. 6. Top with protective paper and press according to time, temperature, and pressure above.
Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling.
